Tesla Wall Connector

The Tesla Wall Connector is a wallbox for a house, an apartment or a workplace, mounted indoors or outdoors. It charges up to 22 kW on a three-phase supply and also runs on single-phase, and you schedule and monitor sessions from the Tesla app. The tethered Type 2 cable is 7.3 m long.

Why this wallbox

• Up to 22 kW / 32 A — on a three-phase supply; single-phase installation is also supported.
• Tesla app — you schedule, manage and monitor charging sessions from your phone.
• Wi-Fi firmware updates — the unit updates itself over the air, with no cable.
• IP55 and 4.5 kg — rated for indoor or outdoor mounting.
• Type B residual current detection — built into the unit.
• 7.3 m tethered cable — plus automatic charge-port opening on Tesla vehicles, straight from the connector.

Specifications

• Maximum power: 32 A / 22 kW
• Phase: three-phase
• Supply voltage: 220 V or 400 V 50/60 Hz
• Connector: Type 2, tethered cable
• Cable length: 7.3 m
• Connectivity: Wi-Fi
• Protection rating: IP55
• Residual current detection: Type B
• Weight: 4.5 kg
• Dimensions: 345 × 155 × 110 mm

Compatibility

The Type 2 cable works with every vehicle that has a Type 2 charging port, Tesla or not. The 22 kW figure requires a three-phase 400 V supply; on a 220 V single-phase supply the power will be lower. Automatic charge-port opening from the connector applies to Tesla vehicles.