Traffic Film Remover 500ml

The Traffic Film Remover is an alkaline pre-wash concentrate. It removes built-up dirt, road film and several days of dust without mechanical contact, applied directly to the paint and body panels. Used before the hand wash, it loosens the heaviest grime and lowers the risk of swirl marks.

Why this product

• No contact needed — it works on the dirt before anything touches the paint.
• Alkaline pH — more cleaning power against road film and stubborn grime.
• Concentrated — you set the strength between 1% and 10%, depending on how dirty the car is.
• Fewer swirl marks — the loose dirt is gone before the mitt goes on.
• Fresh fragrance — pleasant to work with.

How to use

1. Shake the bottle before use.
2. Dilute between 1% and 10%, depending on how dirty the car is. On waxes and ceramic coatings, stay at 5% or below (equivalent to 1:20).
3. Apply on a dry vehicle, from the bottom upwards.
4. Let it dwell for a maximum of 5 minutes.
5. Rinse thoroughly, ideally with pressure water.
6. Carry on with the usual hand wash.

Specifications

• Format: 500 ml
• pH: alkaline
• Dilution: 1% to 10% (up to 5%, or 1:20, on waxes and ceramic coatings)
• Dwell time: maximum 5 minutes
• Application: contactless, on a dry vehicle

Recommendations

• Apply from the bottom up so the product does not run over dry panels and leave marks.
• Never go over 5 minutes of dwell time, and do not let it dry on the surface.
• On protected paint, keep the concentration at 5% or lower to preserve the wax or coating.
• Save the strongest dilutions for the dirtiest areas, such as the lower panels.
• This is a pre-wash step: after rinsing, carry on with the hand wash.