Neutral Snow Foam

The Neutral Snow Foam is a pH-neutral concentrate for pre-washing. The active foam dissolves and lifts dirt off the surface, so when the mitt goes on there are fewer loose particles left to scratch the paint. It has a cola fragrance and comes in 500 ml and 1 L.

Why this product

• pH neutral — safe on ceramic coatings, QD and waxes.
• Active foam — dissolves the dirt and makes contaminants easier to remove.
• Foam density you control — from 1:10 for regular use up to 1:1 for a thicker foam.
• Fewer swirl marks — the loose dirt is gone before anything touches the paint.
• Two formats — 500 ml and 1 L.

How to use

1. Prepare the solution by mixing the product with water, usually at 1:10, in a foam cannon connected to a pressure washer.
2. For a denser foam, increase the concentration (safe up to 1:1).
3. Apply on a dry car, from the bottom upwards.
4. Let it dwell for a few minutes to soften the dirt, without letting it dry.
5. Rinse with water, preferably under pressure.

Specifications

• Formats: 500 ml and 1 L
• pH: neutral
• Dilution: 1:10 for regular use, up to 1:1 for a denser foam
• Equipment: foam cannon connected to a pressure washer
• Compatibility: ceramic coatings, QD and waxes

Recommendations

• Apply from the bottom up so the foam does not run over dry panels.
• Never let the foam dry on the paint — work out of direct sun.
• Turn to 1:1 only for very dirty cars; 1:10 handles routine washes.
• Note: neutral active foam does not replace the hand wash — it works as a pre-wash to prepare the surface.